Skip to main content

GuidelinesRegulatory updates2026.11.09

PPWR Packaging Labeling — A Table Separating the Identification and Operator Markings to Check Now from the Harmonized Label from 2028

Ordering a print run on the strength of ‘every sorting pictogram has to change from 2026’ gets the scope wrong. The manufacturer and importer identification markings under Articles 15 and 18 already apply; the harmonized material label under Article 12 applies from 12 August 2028 or 24 months after the implementing act enters into force, whichever is later. This guide separates each type of marking by basis, application date and exclusions in one table, with an artwork change table and a sequence for checking current artwork.

Key takeaway — PPWR labeling is not one thing. Operator identification markings (Articles 15 and 18) apply now; the harmonized material label for consumer sorting (Article 12(1)) applies from 12 August 2028 or 24 months after the implementing act enters into force, whichever is later; and the reusable packaging label, recycled content marking, deposit marking and EPR identification each have their own timing and character. Before touching the artwork, separate each type of marking by application date and exclusions.

This article is based on Regulation (EU) 2025/40 (PPWR) and Commission Notice C/2026/3084 (implementation guidance), as checked on 6 October 2026. Establish who the manufacturer and importer are first in PPWR responsible operators and internal role allocation.

Table of marking types

Marking Basis Application date Subject and exclusions Mandatory or voluntary
Packaging identification (type, batch or serial number or other identifying element) Article 15(5) General application (2026-08-12) An accompanying document where the size or nature does not allow it Mandatory
Manufacturer's name, registered trade name or registered trademark and postal address (electronic means of contact where possible) Article 15(6), (7) General application On the packaging, a data carrier such as a QR code, or where not possible the data carrier under Article 12 or an accompanying document. Must not replace, obscure or confuse product markings under other EU legislation Mandatory
Importer's name, registered trade name or registered trademark and postal address Article 18(3), (4) General application Where not possible on the packaging, the digital data carrier under Article 12 or an accompanying document Mandatory
Harmonized material composition label (for consumer sorting) Article 12(1) 2028-08-12 or 24 months after the Article 12(6) and (7) implementing acts enter into force, whichever is later Transport packaging except e-commerce packaging, and deposit and return system packaging, are excluded. Packaging containing substances of concern is digitally marked Mandatory
Reusable packaging label and QR code, etc. Article 12(2), (3) 2029-02-12 or 30 months after the implementing act enters into force, whichever is later Open-loop systems without a system operator under Annex VI are exempt from the label and QR obligation Mandatory
Recycled and bio-based content marking Article 12(4) Specifications apply from 2028-08-12 or 24 months after the implementing act enters into force, whichever is later Where used, must comply with the implementing act specifications and the Article 7(8) calculation method Voluntary (guidance Section 13)
Deposit and return system marking Article 12(1) fourth subparagraph, (10) According to the national system Member States may require a harmonized colored label. They may not prohibit the affixing of another Member State's deposit label Depends on the system
EPR fulfilment identification Article 12(9) By 2027-02-12 Identified only by means of a symbol in digital marking such as a QR code Depends on the system

Section 13 of the guidance explains that packaging labeling under Article 12 is a fully harmonized system except for deposit and return systems, that Member States may not adopt national rules adding sorting instructions, and that after the application date of the harmonized label a national label may not be placed next to the EU label. It also explains that Commission Decision 97/129/EC, which established the material identification system, applies until 12 August 2028, after which its abbreviation system may not be used.

What to check now: identification and operator information on current artwork

Article 15(7) and Article 18(4) require identification and operator information to be clear, understandable and legible, and not to replace, obscure or be confused with information required by other EU legislation on the marking of the packaged product. Check current artwork and accompanying documents in the following order.

  1. Is there a packaging identifying element? If not, record whether marking is impossible due to the size or nature of the packaging and whether it is provided in an accompanying document.
  2. Is the manufacturer shown the same as the manufacturer determined under the Article 3 definitions? Does the postal address point to a single point of contact?
  3. Is the EU importer's information present? If the importer changes, the marking changes.
  4. Does it obscure or create confusion with the product's own EU legislative markings (medical device, cosmetics, electrical and electronic, etc.)?
  5. Have the language requirements of the Member State of sale and current national markings been checked?

What to prepare for: the harmonized label waits for the implementing acts

Article 12(6) requires the Commission to adopt by 12 August 2026 the implementing acts establishing the labels and specifications under Article 12(1), (2) and (4), and paragraph (7) requires it to adopt by the same date the implementing acts establishing the methodology for identifying material composition by digital marking. This article does not write as if it had confirmed the status or the designs of those implementing acts. The task for the person in charge is to have the information per packaging (material composition, packaging type, country of sale) ready so that the application date can be calculated when the implementing acts are issued.

Article 12(5) requires labels and data carriers to be affixed, printed or engraved on the packaging visibly, legibly and indelibly; in online sales, the information to be provided before purchase; where the nature or size of the packaging does not allow it, to be affixed to the grouped packaging; and where that is not possible either, to be provided by an electronically readable code. Label information is provided in the language determined by the Member State in which the packaging is made available.

Artwork change table

Below is our own change table to fill in for each artwork before ordering a print run.

Artwork no. Packaging type and use Country of sale Markings to check now (Articles 15 and 18) Harmonized marking to check later (Article 12) Further review Order application date
(example) Sales box v3 Sales packaging, consumer DE, FR Manufacturer and importer information confirmed Material label, awaiting implementing act Whether national label survives January 2027 order
(example) Store delivery box Transport packaging DE Identification information Excluded from Article 12(1) (not e-commerce) Whether reusable
(example) Online order box E-commerce packaging FR Identification information Subject to Article 12(1) Label position

As a fictional example, suppose a household products brand uses separate transport boxes for store deliveries and boxes for consumers' online orders. Even though both are corrugated board, the scope of Article 12(1) differs depending on whether the box is e-commerce packaging. Do not apply the same exclusion and the same artwork to both boxes merely because the material is the same. Link the draft, the legal basis and the date checked, and do not mix unconfirmed items with approved artwork.

Common misunderstandings

Common explanation What the legal text and guidance provide What to check
All sorting pictograms must change from 2026 The harmonized label applies from 2028-08-12 or 24 months after the implementing act, whichever is later. Status of the implementing act
Transport boxes have no marking obligation Only the Article 12(1) label is excluded; the identification and operator markings under Articles 15 and 18 are separate. Identification information
We stated the recycled content percentage, so we are done Content marking is voluntary and separate from the Article 7 minimum content obligation. Calculation method and specifications
National labels have to be removed right now The guidance explains that they cannot sit alongside after the application date and recommends transition before then. Current rules of the country of sale
Medical devices are exempt from all marking Article 12(11) is a conditional exemption, and the Article 15 and 18 markings are separate. Whether the conditions apply

Korean medical device labeling requirements are in the medical device labeling guide. Korean labeling and EU packaging labeling rest on different bases, so review them together so that neither obscures the other on a single artwork.

Documents that speed up the review if prepared before inquiring

  • Country of sale and the use of each packaging (sales, grouped, transport, e-commerce)
  • List of current print artwork and versions
  • Manufacturer and importer information included in the artwork
  • Whether the packaging is reusable and whether it falls under a deposit and return system

Please mention PPWR packaging in your message when you use the PPWR labeling review inquiry. We will set out the markings to check now and the items needing confirmation of the subsequent implementing acts. The scope and cost of the review are advised individually after we have confirmed the packaging configuration and the number of artworks.

Prepared and sources checked: 2026-10-06. Sources: Regulation (EU) 2025/40 Article 12(1) to (11), Article 15(5) to (7), Article 18(3) and (4), Article 71 · Commission Notice C/2026/3084 Section 13 (scope of harmonized labeling). The adoption status and designs of the implementing acts under Article 12(6) and (7) were not checked for this article. The change table, checking sequence and fictional example are our own practical tools and do not replace a compliance judgment on individual packaging.

Frequently asked questions

Q. Which PPWR markings have to go on the packaging right now?
The manufacturer identification information under Article 15(5) and (6) (type, batch or serial number, etc.) and the name, registered trade name or registered trademark and postal address, and the importer's name, trade name, trademark and postal address under Article 18(3). Where the size or nature of the packaging does not allow it, follow the alternatives set in the provisions (an accompanying document, or the digital data carrier under Article 12). These are general provisions applying from 12 August 2026 under Article 71.
Q. From when, and with which pictogram, must the material sorting label be used?
Article 12(1) requires a harmonized label containing material composition information from 12 August 2028 or 24 months after the implementing acts under Article 12(6) and (7) enter into force, whichever is later. The pictogram, format and specifications are set by those implementing acts, so do not present an unverified draft as the official EU design or commit to a large print run.
Q. Does the harmonized label also have to go on transport boxes?
Article 12(1) provides that this obligation does not apply to transport packaging, except e-commerce packaging, or to packaging under a deposit and return system. A box that goes to a consumer from an online order is e-commerce packaging, so the review scope differs even for the same corrugated board.
Q. If we state the recycled content on the label, does that satisfy PPWR?
Section 13 of the Commission guidance explains that the recycled and bio-based content marking under Article 12(4) is voluntary. However, where it is used, it must follow the specifications of the implementing act and the calculation method under Article 7(8). Whether to mark and the minimum content obligation under Article 7 are separate matters.

Just send the product details.
We do the reviewing.

We pre-review device class, required pathway, and data readiness free of charge, and reply within 1 business day. No sign-up.